Brocade 6910 Ethernet Access Switch MIB Reference - Manual (Page 36)

24 Brocade 6910 Ethernet Access Switch MIB Reference
53-1002652-02
3
Performance Monitoring of Loss Measurement Objects
Current Statistics for Loss Measurement table
The mefSoamLmCurrentStatsTable contains statistics for the current Loss Measurement interval.
Name, Identifier, and Syntax Access Description
mefSoamLmCurrentStatsTable
1.3.6.1.4.1.15007.1.3.1.2.3
Syntax: SEQUENCE OF
MefSoamLmCurrentStatsEntry N/A This table contains the results for the current Measurement
Interval in a SOAM Loss Measurement session.
A row in this table is created automatically by the SNMP
Agent when the Loss Measurement session is configured.
Unless otherwise indicated, the objects in this table are
ignored if mefSoamLmType is 1SlTx.
Except for mefSoamLmCurrentStatsIndex and
mefSoamLmCurrentStatsSuspect, each object in this table
applies only if the corresponding bit is set in
mefSoamLmCounterEnable.
The objects in this table are not persistent upon reboot or
restart of a device.
mefSoamLmCurrentStatsEntry
1.3.6.1.4.1.15007.1.3.1.2.3.1
Syntax:
MefSoamLmCurrentStatsEntry N/A The conceptual row of mefSoamLmCurrentStatsTable
mefSoamLmCurrentStatsIndex
1.3.6.1.4.1.15007.1.3.1.2.3.1.1
Syntax: Unsigned32 Read-only The index for the current measurement interval for this PM
session. An On-Demand test is a one round test, so the index
is always 1.
This value will become the value for
mefSoamLmHistoricStatsIndex once the measurement
interval is completed.
This object applies regardless of the value of
mefSoamLmType.
mefSoamLmCurrentStatsStartTime
1.3.6.1.4.1.15007.1.3.1.2.3.1.2
Syntax: DateAndTime Read-only The time that the current measurement interval started. This
object applies regardless of the value of mefSoamLmType.
mefSoamLmCurrentStatsElapsedTi
me
1.3.6.1.4.1.15007.1.3.1.2.3.1.3
Syntax: TimeInterval Read-only The time that the current measurement interval has been
running, in 0.01 seconds. This object applies regardless of
the value of mefSoamLmType.
mefSoamLmCurrentStatsSuspect
1.3.6.1.4.1.15007.1.3.1.2.3.1.4
Syntax: TruthValue Read-only Whether the measurement interval has been marked as
suspect.
mefSoamLmCurrentStatsForwardTr
ansmittedFrames
1.3.6.1.4.1.15007.1.3.1.2.3.1.5
Syntax: Gauge32 Read-only This attribute contains the number of frames transmitted in
the forward direction by this MEP.
mefSoamLmCurrentStatsForwardR
eceivedFrames
1.3.6.1.4.1.15007.1.3.1.2.3.1.6
Syntax: Gauge32 Read-only This attribute contains the number of frames received in the
forward direction by this MEP.