Brocade Multi-Service IronWare Software Defined Networking (SDN) Configuration Guide (Supporting R05.6.00) User Manual
Page 34
24
Multi-Service IronWare SDN Configuration Guide
53-1003034-02
Configuring OpenFlow
1
Member of VLAN 1 (untagged), port is in untagged mode, port state is Disabled
STP configured to ON, Priority is level0, flow control enabled
OpenFlow enabled, Openflow Index 1, Flow Type Layer2
Priority force disabled, Drop precedence level 0, Drop precedence force disabled
dhcp-snooping-trust configured to OFF
Displaying the configured connections to controllers
Use the show openflow command to display the OpenFlow configuration, including the configured
connections to controllers on the device.
Brocade(config)# show openflow
Administrative Status:
Enabled
Controller Type:
OFV 100
Number of Controllers:
3
Controller 1:
Connection Mode:
active, TCP
Controller Address:
10.25.128.243
Connection Port:
6633
Controller 2:
Connection Mode:
active, TCP
Controller Address:
10.25.128.242
Connection Port:
6633
Controller 3:
Connection Mode:
passive, TCP
Listening Address:
0.0.0.0
Connection Port:
6633
Match Capabilty:
Port, Destination MAC, Vlan, Vlan PCP
Openflow Enabled Ports:
e1/1 e1/2