Brocade Encryption Switch QuickStart Guide (Supporting Fabric OS v6.1.1_enc) User Manual
Brocade encryption switch, Quickstart guide
Advertising
Table of contents
Document Outline
- Overview
- Port side of the switch
- Non-port side of the switch
- Field-replaceable units (FRUs)
- Time and items required
- Site preparation and installation guidelines
- Items included with the switch
- Installing a standalone switch
- Powering on the switch
- Configuring the switch
- Connecting a serial cable between switch and host
- Logging in to the serial console port
- Setting the IP address
- Logging off the serial console port and disconnecting the serial cable
- Connecting an Ethernet cable and opening a Telnet session
- Setting the domain ID
- Setting the date and time
- Verifying correct operation and backing up the configuration
- Installing SFPs and attaching cables
- Managing cables
- Powering off the switch
- Configuring for encryption