Brocade Mobility 7131N-FGR Access Point Installation Guide (Supporting software release 4.0.0.0-035GRN and later) - Manual (Page 28)

LED indicators
2
20 Brocade Mobility 7131N-FGR Access Point Installation Guide
53-1001948-01
Dual radio (2.4/5 Ghz) LEDs
A dual radio (2.4/5 Ghz) Brocade Mobility 7131N-FGR Access Point has the
following unique LED behavior:
LED 1 LED 2 (LAN) LED 3 (WAN) LED 4 - 5 GHz LED 5 - 2.4 GHz LED 6
Blinking Red
indicates
booting.
Solid Red
defines the
diagnostic
mode.
White defines
normal
operation. Green defines
normal GE1
operation. Green defines
normal GE2
operation. Blinking
Amber
indicates
802.11a
activity.
A 5 second
Amber and
Yellow blink
rate defines
802.11an
activity.
A 2 second
Amber and
Yellow blink
rate defines
802.11an
(40 MHz)
activity.
When
functioning as
a sensor, LED
alternates
between
Amber and
Yellow.
The blink
interval is 0.5
seconds. It’s
1 second
when no
Server is
connected. Blinking
Emerald
indicates
802.11bg
activity.
A 5 second
Emerald and
Yellow blink
rate defines
802.11bgn
activity.
A 2 second
Emerald and
Yellow blink
rate defines
802.11bgn
(40 MHz)
activity.
When
functioning as
a sensor, LED
alternates
between
Emerald and
Yellow.
The blink
interval is 0.5
seconds. It’s
1 second
when no
Server is
connected. Not Used
AP7131N_InstallationGuide.book Page 20 Tuesday, August 24, 2010 5:09 AM