Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 119)

Brocade Mobility 7131 Access Point Product Reference Guide 107
53-1002517-01
4
3. Configure the HTTP Import/Export field to import/export Mobility 7131 Access Point
configuration settings using HTTP.
CAUTION
For HTTP downloads (exports) to be successful, pop-up messages must be disabled.
Password Define a password allowing access to the server for the import or export operation.
Import Configuration Click the Import Configuration button to import the configuration file from the server
with the assigned filename and login information. The system displays a confirmation
window indicating the administrator must log out of the Mobility 7131 Access Point after
the operation completes for the changes to take effect. Click
Yes to continue the
operation. Click No to cancel the configuration file import.
Export Configuration Click the Export Configuration button to export the configuration file from the server
with the assigned filename and login information. If the IP mode is set to DHCP Client, IP
address information is not exported (true for both LAN1, LAN2 and the WAN port). For
LAN1 and LAN2, IP address information is only exported when the IP mode is set to either
static or DHCP Server. For the WAN port, IP address information is only exported when the
This interface is a DHCP Client checkbox is not selected. For more information on
these settings, see Configuring the LAN Interface on page 5-115 and Configuring WAN
Settings on page 5-127.
The system displays a confirmation window prompting the administrator to log out of the
Mobility 7131 Access Point after the operation completes for the changes to take effect.
Click
Yes to continue the operation. Click No to cancel the configuration file export.
Upload and Apply A
Configuration File Click the Upload and Apply A Configuration File button to upload a configuration file
to this access point using HTTP.
Download
Configuration File Click the Download Configuration File button to download this access point’s
configuration file using HTTP.