Brocade Mobility 7131 Access Point Product Reference Guide (Supporting software release 4.4.0.0 and later) - Manual (Page 374)

362 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
8
For information on configuring the Rogue AP options available to the access point using the applet
(GUI), see Configuring Rogue AP Detection on page 6-234.
br7131>admin(network.wireless.rogue-ap)>set
Description:
Defines the Mobility 7131 Access Point ACL rogue AP method.
Syntax:
Example:
admin(network.wireless.rogue-ap)>
admin(network.wireless.rogue-ap)>
set mu-scan enable
admin(network.wireless.rogue-ap)>
set interval 10
admin(network.wireless.rogue-ap)>
set on-channel disable
admin(network.wireless.rogue-ap)>
set detector-scan disable
admin(network.wireless.rogue-ap)>
set ABG-scan disable
admin(network.wireless.rogue-ap)>
set brocade-ap enable
admin(network.wireless.rogue-ap)>
set applst-ageout 10
admin(network.wireless.rogue-ap)>
set roglst-ageout 10
admin(network.wireless.rogue-ap)>
show
MU Scan : enable
MU Scan Interval : 10 minutes
On Channel : disable
Detector Radio Scan : disable
Auto Authorize Brocade APs : enable
Approved AP age out : 10 minutes
Rogue AP age out : 10 minutes
For information on configuring the Rogue AP options available to the access point using the applet
(GUI), see
Configuring Rogue AP Detection on page 6-234.
set mu-scan <mode> Enables or disables to permit MUs to scan for rogue APs.
interval <minutes> Define an interval for associated MUs to beacon in attempting to locate rogue APs. Value
not available unless mu-scan is enabled.
on-channel <mode> Enables or disables on-channel detection.
detector-scan <mode> Enables or disables AP detector scan (dual-radio model only).
ABG-scan <mode> Enables or disables A/BG Detector scan mode (on both bands).
brocade-ap <mode> Enables or disables the Authorize Any AP with a Brocade MAC address option.
applst-ageout <minutes> Sets the approved AP age out time.
roglst-ageout <minutes> Sets the rogue AP age out time.