Brocade Network Advisor Software Licensing Guide (Supporting Network Advisor 12.3.0) - Manual (Page 18)

xviii Brocade Network Advisor Software Licensing Guide
53-1003219-02
• Detailed description of the problem, including the application or fabric behavior
immediately following the problem, and specific questions
• Network Advisor supportsave output
• Description of any troubleshooting steps already performed and the results
3. World Wide Name (WWN)
Use the licenseIdShow command to display the WWN of the chassis.
If you cannot use the licenseIdShow command because the switch is inoperable, you can get
the WWN from the same place as the serial number, except for the Brocade DCX. For the
Brocade DCX, access the numbers on the WWN cards by removing the Brocade logo plate at
the top of the nonport side of the chassis.
Document feedback
Quality is our first concern at Brocade and we have made every effort to ensure the accuracy and
completeness of this document. However, if you find an error or an omission, or you think that a
topic needs further development, we want to hear from you. Forward your feedback to:
[email protected]
Provide the title and version number of the document and as much detail as possible about your
comment, including the topic heading and page number and your suggestions for improvement.