Brocade Network Advisor Software Licensing Guide (Supporting Network Advisor 12.3.0) - Manual (Page 25)

Brocade Network Advisor Software Licensing Guide 7
53-1003219-02
Chapter
2
Management Application
In this chapter
• Managed count . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
• Upgrading the Management application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Managed count
The Management application audits and verifies the managed count against the maximum limit for
your license under the following conditions:
• Every three hours from server start time. Note that you may be able to manage more products
or ports than the maximum licensed limit briefly (maximum of three hours) between these
periodic checks.
• When a new client logs in to the server.
• When you access the License dialog box (Help > License).
NOTE
SAN Professional Plus Licensed versions can manage up to 2,560 ports.
NOTE
SAN Enterprise Trial and Licensed versions can manage up to 15,000 ports and 100 fabrics.
NOTE
SAN +IP Enterprise Trial and Licensed versions can only manage up to 50 IP devices when managing
over 9000 SAN ports.
NOTE
For full performance management and dashboard functionality, the Large option of the SAN
Enterprise edition only supports 5,000 switch ports on a 32-bit system.
NOTE
Virtual Fabrics are counted as fabrics when calculating the managed count limits.
NOTE
IP Enterprise Licensed version can manage up to 5,050 IP products and 100 MPLS products with
the appropriate number of device licenses installed.
NOTE
IP Enterprise 120 days Trial version can manage up to 150 IP products and 10 MPLS products with
the appropriate number of device licenses installed.