Brocade Virtual ADX Security Guide (Supporting ADX v03.1.00) - Manual (Page 81)

Brocade Virtual ADX Security Guide 69
53-1003250-01
Displaying NAT information
4
Syntax: [no] ip nat [inside | outside]
The inside parameter configures the interface as an IP NAT inside interface.
The outside parameter configures the interface as an IP NAT outside interface.
Displaying NAT information
The following sections describe how to display NAT information.
Displaying NAT statistics
To display NAT statistics, enter commands such as the following.
Virtual ADX#rconsole 1 1
Virtual ADX1/1 #Virtual ADX_Lower1/1#show ip nat stat
Debug counters:
TCP FWD:
send nat unreachable tcp fwd) =0 nat tcp no ports avl = 2867811
nat tcp status zero = 0 nat tcp ip status zero = 0
nat tcp usr index null = 0
TCP REV:
send nat unreachable (tcp rev) =0 nat tcp rev no ports avl = 0
nat tcp rev status zero = 0 nat tcp rev ip status zero = 0
nat tcp rev usr index null = 0
UDP FWD:
send nat unreachable (udp_fwd) =0 nat udp fwd no ports avl = 0
nat udp fwd status zero = 0 nat udp fwd ip status zero = 0
nat udp fwd usr index null = 0
UDP REV:
send nat unreachable (udp rev) =0 nat udp rev no ports avl = 0
nat udp rev status zero = 0 nat udp rev ip status zero = 0
nat udp rev usr index null = 0
nat corruption = 0 rtsp port unavailable = 0
RTSP inside alloc same = 53271 RTSP reply port not same= 0
Wrong port range = 0
Total translations: 12433 (0 static, 12433 dynamic)
Hits: 5786108 Misses: 94
Expired translations: 5773769