Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 121)

Brocade Virtual ADX MIB Reference 109
53-1003312-01
VLAN by IP subnet configuration table
VLAN by IP subnet configuration table
The following table applies to protocol VLANs that use the IP routing protocol.
snVLanByProtocolChassisDy
namicMask
brcdIp.1.1.3.2.2.1.11
Syntax: OctetString Read-write Applies to all devices, except for ServerIron products.
This object has 32 octets. This object shows the Chassis Protocol
VLAN active port membership.
snVLanByProtocolVLanName
brcdIp.1.1.3.2.2.1.12
Syntax: DisplayString Read-write Shows the name of the community string that is allowed to access
the VLAN.
Valid values: Up to 32 characters.
snVLanByProtocolStaticPortL
ist
brcdIp.1.1.3.2.2.1.13
Syntax: OctetString Read-write Applies to all devices, except for ServerIron products.
This object is an index of ports that are the configured to be
members of the Protocol VLAN. Each port index is a 16-bit integer in
big endian order. The first 8 bits are the slot number; the other 8 bits
are the port number.
snVLanByProtocolExcludePor
tList
brcdIp.1.1.3.2.2.1.14
Syntax: OctetString Read-write Applies to all devices, except for ServerIron products.
This object is an index of ports that are excluded from port
membership of the Protocol VLAN. Each port index is a 16-bit integer
in big endian order. The first 8 bits are the slot number; the other 8
bits are the port number.
snVLanByProtocolDynamicP
ortList
brcdIp.1.1.3.2.2.1.15
Syntax: OctetString Read only Applies to all devices, except for ServerIron products.
This object is an index of ports that can dynamically join the port
membership of the Protocol VLAN. Each port index is a 16-bit integer
in big endian order. The first 8 its are the slot number; the other 8
bits are the port number.
Name, OID, and Syntax Access Description
Name, OID, and Syntax Access Description
snVLanByIpSubnetTable
brcdIp.1.1.3.2.3 None The VLAN by IP Subnet Configuration Table.
snVLanByIpSubnetEntry
brcdIp.1.1.3.2.3.1 None An entry in the VLAN By IP Subnet Configuration table
snVLanByIpSubnetVLanId
brcdIp.1.1.3.2.3.1.1Syntax:
Integer Read only Shows the VLAN ID index to both of the VLAN By Port Info Table
and this table. Valid values: 1 - 4095
snVLanByIpSubnetIpAddress
brcdIp.1.1.3.2.3.1.2
Syntax: IpAddress Read only Shows the IP address for the subnet of the protocol-based IP
VLAN.
snVLanByIpSubnetSubnetMask
brcdIp.1.1.3.2.3.1.3
Syntax: IpAddress Read only Subnet mask associated with the subnet IP address.
snVLanByIpSubnetDynamic
brcdIp.1.1.3.2.3.1.4
Syntax: Integer Read-write Applies only to switches. Indicates whether or not dynamic port
inclusion is enabled:odisabled(0)oenabled(1)