Brocade Virtual ADX MIB Reference (Supporting ADX v03.1.00) - Manual (Page 69)

Brocade Virtual ADX MIB Reference 57
53-1003312-01
Switch port information
snSwIfStatsMultiColliFrames
brcdIp.1.1.3.3.5.1.33
Syntax: Counter Read only Shows the number of dot3StatsMultipleCollisionFrames, which
consists of successfully transmitted frames on a particular
interface for which transmission is inhibited by more than one
collision.
A frame that is counted by an instance of this object is also
counted by the corresponding instance of either the
ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts and is
not counted by the corresponding instance of the
dot3StatsSingleCollisionFrames object.
snSwIfStatsTxColliFrames
brcdIp.1.1.3.3.5.1.34
Syntax: Counter Read only Shows the number of successfully transmitted frames on a
particular interface for which transmission is inhibited by more
than one collision. This count is a combination of the
dot3StatsSingleCollisionFrames and
dot3StatsMultipleCollisionFrames objects.
snSwIfStatsRxColliFrames
brcdIp.1.1.3.3.5.1.35
Syntax: Counter Read only Shows the number of successfully received frames on a particular
interface for which transmission is inhibited by more than one
collision.
snSwIfStatsFrameTooLongs
brcdIp.1.1.3.3.5.1.36
Syntax: Counter Read only Shows the number of dot3StatsFrameTooLongs, which consists of
frames received on a particular interface that exceed the
maximum permitted frame size.
The count represented by an instance of this object is
incremented when the frameTooLong status is returned by the
MAC service to the LLC (or other MAC user). According to the
conventions of IEEE 802.3 Layer Management, received frames
for which multiple error conditions are obtain are, counted
exclusively according to the error status presented to the LLC.
snSwIfStatsFrameTooShorts
brcdIp.1.1.3.3.5.1.37
Syntax: Counter Read only Shows the number frames received on a particular interface that
are below the minimum permitted frame size.
snSwIfStatsInBcastFrames
brcdIp.1.1.3.3.5.1.38
Syntax: Counter Read-write Shows the total number of broadcast packets received on the
interface.
snSwIfStatsOutBcastFrames
brcdIp.1.1.3.3.5.1.39
Syntax: Counter Read only Shows the total number of broadcast packets transmitted out of
the interface.
snSwIfStatsInMcastFrames
brcdIp.1.1.3.3.5.1.40
Syntax: Counter Read only Shows the total number of multicast packets received on the
interface.
snSwIfStatsOutMcastFrames
brcdIp.1.1.3.3.5.1.41
Syntax: Counter Read only Shows the total number of multicast packets transmitted out of
the interface.
snSwIfStatsInDiscard
brcdIp.1.1.3.3.5.1.42
Syntax: Counter Read only Shows the number of inbound packets that will be discarded even
though they have no errors. These packets will be discarded to
prevent them from being deliverable to a higher-layer protocol. For
example, packets may be discarded to free up buffer space.
snSwIfStatsOutDiscard
brcdIp.1.1.3.3.5.1.43
Syntax: Counter Read only Shows the number of outbound packets that will be discarded
even though they contain no errors. For example, packets may be
discarded to free up buffer space.
Name, OID, and Syntax Access Description