Elitegroup A990FXM-A (V1.1) - Manual (Page 34)

Chapter 3
A990FXM-A USER MANUAL
30
Power Management Setup
This page sets up some parameters for system power management operation.
Resume By PME (Disabled)
These items specify whether the system will be awakened from power saving modes
when activity or input signal of the specified hardware peripheral or component is
detected.
Power LED Type (Dual Color LED)
This item enables you to set Power LED type.
Resume By USB2.0 (S3) (Disabled)
This item allows you to enable/disable the USB2.0 device wakeup function from S3
mode.
Power Management Setup
Resume By PME [Disabled]
Resume By USB2.0 (S3) [Disabled]
Resume By PS2 KB (S3) [Disabled]
Resume By PS2 MS (S3) [Disabled]
EUP Function [Enabled]
Power LED Type [Dual Color LED]
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Version 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.
Main Advanced Chipset M.I.B X Boot Security Save & Exit
+/- : Change Opt.
Enter : Select
F1:General Help
:Select Screen
:Select Item
F2:Previous Value
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
About Resume by
PCI/PCI-E/Lan/Ext. USB3.0 PME
EUP Support (Enabled)
This item allows user to enable or disable EUP support.
Resume By PS2 MS (S3) (Disabled)
This item enables or disables you to allow PS2 mouse activity to awaken the system
from power saving mode.
Resume By PS2 KB (S3) (Disabled)
This item enables or disables you to allow PS2 keyboard activity to awaken the sys-
tem from power saving mode.
Press <Esc> to return to the Advanced Menu page.