Elitegroup A990FXM-A (V1.1) - Manual (Page 41)

Chapter 3
A990FXM-A USER MANUAL
37
AltVid (0)
This item specifies the VID driven to the VDD power plane(s) while in the low power
state 0:24N:3xDC[6:0].
VSSlamTime (Auto)
This item specifies the time to wait for voltage stabilization during altvid
transitions if a new VID is provided to the voltage regulator without ramping.
0:24N:3xDC [31:29]
Slam Time Mode (Auto)
This item enables you to set slam time mode, this option is only for RB-C3, BL-C3,
DA-C3.
Memory Control
Memory Clock DCT0 is: None
Memory Clock DCT1 is: (DDR-1333/667MHz)
Memory Clock Mode [Specific]
Memclock Value [DDR 1333(667MHz)]
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Version 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.
+/- : Change Opt.
Enter : Select
F1:General Help
:Select Screen
:Select Item
F2:Previous Value
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Set Memclock Value.
Main Advanced Chipset M.I.B X Boot Security Save & Exit
Memory Control
Scroll to this item and press <Enter> to view the following screen:
Memory Clock DCT1 is (DDR-1333/667MHz)
This item shows current memory clock of DCT1.
Memory Clock Mode (Specific)
This item allows user to set the memory clock mode.
Memory Clock DCT0 is (None)
This item shows current memory clock of DCT0.
Memclock Value ( DDR 1333(667MHz) )
This item allows user to set the memclock value.
Press <Esc> to return to the M.I.B X Menu page.