Elitegroup EZ-Buddie2 D21 I4-3 Install v.3 - Manual (Page 10)

10
The Installation of Hard Disks
The Installation Locations and the Colors
Name Corresponding
color
Socket Plug
Hard Disk
Lines(ATA100)
Installation Notes:
1. For the convenience in installation, we strongly recommend you to install the hard drives first and then the Optical
Device Drives. If you fail to follow this sequence, it is still possible and more difficult to install hard drives later.
2. Please be aware that the cables connected to hard drivers are yellow.
Installing the Hard Drives
A. Unscrew the screw and take out
the hard-disk bracket.
B. Put your hard disk into the bracket.
C. Screw the hard disk to the both
side of the bracket.
D. Screw the bracket back to same
place.
E. Insert one end of the yellow cable into the
blue IDE slot by the direction of the foolproof
device.
F. Insert the other end of the yellow cable into
the hard drive by the direction of the
foolproof device, and the power cable with
the red line on the inside.