Elitegroup EZ-Buddie2 D21 I4-3 Install v.3 - Manual (Page 5)

5
Name Corresponding
Color
Socket Plug
Power Line for Heat
Sink and System Fan
Installation Notes:
1. A CPU can only be installed in a particular direction, which can be sure by aligning the notch at the corner of CPU and
the notch at the corner of the socket (shown in the enlarged picture of the second operation illustration). Please note
that the pins of CPU are very fragile. If the CPU cannot smoothly install into the socket, two possible situations might
have occurred. First, some of the pins are bended. Please use tools to carefully straighten the pins. The second
possibility is that the direction is wrong. Please remember to align those two notches of the CPU and the socket
correctly.
2. This PC comes with a cooling fan, a high performance Smart Fan. This Fan can effectively exhausts heat in the PC
case, and can keeps the PC in the best noise-free state (Some devices, like hard disk drives and CD-ROM drives,
can also cause noise. Since those devices are designed and made by other manufacturers, we can only reduce but
cannot totally control the noise caused by the devices.). However, for compatibility, this series of PC case is specially
designed for mainboards that supports Pentium 4. Therefore, a cooling system designed for AMD CPU cannot be
installed into and worked with this PC. Please use the cooling system that comes with this PC to ensure the
effectiveness of heat exhausting, which provides the stability of the PC.
3. The cooling fan is designed with a locking handle that sticks out of it. Please make sure the handle is directed to the
other side of memory slots. A wrong direction will keep you from installing a hard disk.
Installing the CPU
安裝散熱裝置的方法
A. Unscrew those four screws
around the ventilation opening.
B. Flat the EZ-Buddie 2, locate the heat
pipe.
C. Remove the fan cover on the heat
pipe.