Nm70-i2 user manual, Chapter 2 – Elitegroup NM70-I2 (V1.0) User Manual
Page 17
Advertising
Chapter 2
13
NM70-I2 USER MANUAL
Install the VGA Card in the PCIEX16 slot
1
Remove a blanking plate from the system case corresponding to the slot
you are going to use.
2
Install the edge connector of the add-on card into the expansion slot.
Ensure that the edge connector is correctly seated in the slot.
3
Secure the metal bracket of the card to the system case with a screw.
For some add-on cards, for example graphics adapters and network adapters,
you have to install drivers and software before you can begin using the add-on
card.
Follow these instructions to install an add-on card:
Please refer the following illustrations to install the add-on card:
Advertising