Hired-Hand Mega Flow SlantWall Fans: V-Belt Tensioner Conversion Kit User Manual
V-belt tensioner conversion kit, Warning, Parts list
HIRED-HAND MFG., INC.
• 1733 Co Rd 68 • Bremen, Alabama 35033 • Phone 256-287-1000 • Fax 265-287-2000
Manual Part Number 4802-5095 Rev. 12-04 Page 1 of 2
Figure 1 - Remove the Motor
WARNING
Disconnect all Electrical Power before installing the V-Belt Tensioner.
Parts List
Instructions
1. Turn off all power to the fan.
2. Remove the existing belt.
3. See Figure 1. Remove the four cap screws and lock nuts
holding the motor and remove the motor. It is not
necessary to remove the pulley from the motor shaft. Save
the cap screws and lock nuts. They will be used in Step 5
when re-installing the motor.
!
Tools Required:
7/16" Ratchet Set
Straight Edge
7/16" Wrench
1/2" Ratchet Set
1/2" Wrench
5/32" Allen Wrench
MegaFlow KIT 48 Conv PT to Belt Ten (6650-1020)
Part Number
Qty
Description
6403-9201
1
MF-36/48S Idler Pulley Assembly
1011-9005
1
Sheave Idler Assy Alum 3.5V
0404-4665
1
FAB GS 48 MF Belt tension bracket
1004-1426
1
Cap Screw 3/8-16x1 hx2 Z
1004-6020
1
Cap Screw-20x3/8 Hx Ws Zinc
1004-1402
6
Cap Screw ¼-20x3/4 hx2 Z
1001-1446
6
Lock Nut ¼-20 N/I hx Zinc
1003-1461
2
Flat Washer ¼ USS Zinc
1022-3102
1
Belt AX49 Gold Label Cog Belt
IMPORTANT!
Locate packing slip and make sure that all listed parts
are enclosed. If not, call your Hired-Hand distributor
immediately. Please read and understand all
instructions in this manual before installing V-Belt.
Funnel Flow KIT FF 48 Conv PT to Belt Ten (6650-1030)
Part Number
Qty
Description
6403-9207
1
FF-36/48S Idler Pulley Assembly
1011-9005
1
Sheave Idler Assy Alum 3.5V
0403-4891
1
FAB SS FF Mtr Tension Brkt
1004-1426
1
Cap Screw 8-16x1 hx2 Z
1004-6020
1
Cap Screw-20x3/8 Hx Ws Zinc
1004-5017
6
Cap Screw 1/4x20x3/4 Hx2 SS
1001-0104
6
Lock Nut ¼-20 N/I hx SS
1003-0108
2
Flat Washer ¼ SS
1022-3102
1
Belt AX49 Gold Label Cog Belt
*Converts a Power Twist Belt to V-Belt with Tensioner
V-Belt Tensioner Conversion Kit
MegaFlow KIT 36 Conv PT to Belt Ten (6650-1025)
Part Number
Qty
Description
6403-9201
1
MF-36/48S Idler Pulley Assembly
1011-9005
1
Sheave Idler Assy Alum 3.5V
0404-4665
1
FAB GS 48 MF Belt tension bracket
1004-1426
1
Cap Screw 3/8-16x1 hx2 Z
1004-6020
1
Cap Screw-20x3/8 Hx Ws Zinc
1004-1402
6
Cap Screw ¼-20x3/4 hx2 Z
1001-1446
6
Lock Nut ¼-20 N/I hx Zinc
1003-1461
2
Flat Washer ¼ USS Zinc
1022-3101
1
Belt AX44 Gold Label Cog Belt
Funnel Flow KIT FF 36 Conv PT to Belt Ten (6650-1040)
Part Number
Qty
Description
6403-2158
1
FF-36" Tensioner Assembly
1011-9003
1
Sheave Idler Assy Alum 3"V
0403-5522
1
FAB SS 36 FF belt tension bracket
1004-1426
1
Cap Screw 8-16x1 hx2 Z
1004-6020
1
Cap Screw-20x3/8 Hx Ws Zinc
1004-5017
6
Cap Screw 1/4x20x3/4 Hx2 SS
1001-0104
6
Lock Nut ¼-20 N/I hx SS
1003-0108
2
Flat Washer ¼ SS
1022-3100
1
Belt AX34 Gold Label Cog Belt