Hired-Hand Mega Flow SlantWall Fans: 36 48 & 52 Mega Flow Cone Fan Unassembled - Manual (Page 10)

Part No. 4801-3006 Rev 6/07 36" 48" & 52" Mega Flow - Unassembled Page 10 of 12
8. Shutter Installation
NOTE: Shutter Fits Onto Intake Side of Fan
1. Lift shutter.
2. Check that shutter is flush against housing at all points.
3. Manually open vanes of shutter to gain access to latches on fan housing. Lock shutter latches.
4. Installation complete.
Carefully lift shutter!
Note: Latch is hidden in
this view.
See diagram on Page 9.
Slot for latch
With shutter in place,
manually open vanes of
shutter to access latch. Fasten
latch (located inside fan
housing) into slot in flange of
shutter. Firmly lock down
latch. Repeat procedure to
latch opposite side of shutter.