Mega flow, Fan & cone installation – Hired-Hand Mega Flow SlantWall Fans: 36 48 & 52 Mega Flow Cone Fan Unassembled User Manual
Page 7
Part No. 4801-3006 Rev 6/07
36" 48" & 52" Mega Flow - Unassembled
Page 7 of 12
MEGA FLOW
Fan & Cone Installation
SLANTWALL
Rear Gusset
Flat Washer
(1003-1461)
10. Refer to Figure 2. Install the two
tension latches (1040-0105) to the
right and left cabinet panels with
3/16" fan rivets (1005-5006).
11. Refer to Detail F. Install the
right, left, bottom and top
cabinet panels to the fan orifice
using fan rivets (1005-3049).
12. Refer to Detail F. Install four 1/4"-
20 x 1" screws (1004-2533), flat
washers (1003-1461), and lock nuts
(1001-1446) to the rear gusset
through the top and side of the
cabinet.
Figure 2 - Assemble Cabinet, Fan and Motor
Cabinet Bottom
36" (0404-6973)
48" (0404-6971)
52" (0404-6937)
Cabinet Top
36" (0404-6974)
48" (0404-6978)
52" (0404-6938)
Cabinet Right
36" (0404-6976)
48" (0404-6980)
52" (0404-6939)
Cabinet Left
36" (0404-6975)
48" (0404-6979)
52" (0404-6940)
Fan Prop
Key Shear
(1019-2417)
Latch
(1040-0105)
Gusset
¼" - 20 x 1"
(1004-2533)
Detail F
Lock Nut
(1001-1446)
Use rear set of
mounting holes