Install system end caps, Front view, Side view – Hired-Hand Mega-Cool rev 4-08 User Manual
Page 23
Advertising
Part No. 4801-5093 Rev 4-08
Unitized System
Page 23
Install System End Caps
1. Install metal end cap assembly at each end of system. (See
Page 22)
2. Fit spray line through hole at top of end cap.
3. Securely fasten end caps to framing with #10 x 1” TEK
screws.
4. Press 1/4” plastic plugs into exposed holes to prevent spray
from coming through these holes.
5. Paste label onto end cap as shown.
Front View
Left
End Cap
Side View
Fit end of
spray line
through
hole
.
End Cap
ASSEMBLY
Label
Advertising
This manual is related to the following products: