Johnson Level & Tool Mfg. 40-6006 User Manual
Page 12
12
©2013 Johnson Level & Tool - Rev. 1
Area Measurement (Square
2
)
1. With unit turned on, hold down the button until the area symbol
( ) is displayed.
2. Press the button once to measure the width. The bottom area
symbol line will be flashing.
3. Press the button a second time to measure the length. The right
side area symbol line will be flashing.
4. The area will be displayed on the main screen in square feet. Area
symbol will be flashing.
Volume Measurement (Cube
3
)
1. With the unit turned on, hold the button until the volume
symbol, 3 dimensional icon ( ) is displayed.
2. Press the button once to measure the width. The bottom
volume symbol line will be flashing.
3. Press the button a second time to measure the length. Right
side volume symbol line will be flashing.
4. Press the button a third time to measure the height. Side
volume symbol line will be flashing.
5. The volume will be displayed on the main
screen in cubic feet.
7349H-English_Manuals 9/6/13 1:55 PM Page 12