Johnson Level & Tool Mfg. 40-6006 - Manual (Page 8)

8 ©2013 Johnson Level & Tool - Rev. 1
Settings
The 40-6006 has two menu settings:
1. Units of Measure
2. Measurement Reference Position
To enter menu settings:
With the unit turned OFF, press and release the + buttons
simultaneously.
Units of Measure
LCD will display UNIT – there are seven units of measure
1. Press the button to change the units of measure from:
Feet only in decimal (ft)
Inches only in decimal (in)
Feet and inches in fractions of 1/16" (in)
Feet and inches in fractions of 1/8" (in)
Feet and inches in fractions of 1/4" (in)
Feet and inches in fractions of 1/2" (in)
Meters (m)
2. To exit units of measure and enter the reference position, press the
button once to enter the reference setting or the button
to begin operations.
6. Using the Product
Measurement Reference Position
There are two reference positions for the 40-6006
1. Front
2. Rear
To enter the reference position settings:
1. Enter menu settings as described above.
2. Press the button to move from units to reference.
7349H-English_Manuals 9/6/13 1:55 PM Page 8