Johnson Level & Tool Mfg. 40-6005 User Manual
Page 21
©2013 Johnson Level & Tool - Rev. 1
21
Stake-out
Stake-out mode is designed to mark off repetitive
equal distances. For example, fence post installation
or framing.
1. To use Stake-out, you have to set one value or “stake” in memory.
2. Turn the unit on.
3. Press and release three times to enter the first stake setting.
4. Press to increase your value.
5. Press to decrease your value.
6. Hold for two seconds to shift to positions.
7. Once value is set, press to enter.
Enter Continuous Measuring Mode by pressing and holding .
An arrow will guide direction. This function can be stopped by
pressing the red power button .
Memory Recall
This instrument stores your last 20 measurements in order recognizing
their unit of measure and measuring mode.
Press and hold the button.
Press or buttons to scroll up or down through the recorded
measurements.
6834H-English_Manuals 4/2/13 1:28 PM Page 21