Lincoln Electric IM467 SQUARE WAVE TIG 355 - Manual (Page 48)

EQUIPMENT MANUFACTURER’S CERTIFICATION
Type of Equipment
Model Number
Code Number
Serial Number
Operating Instruction Manual Number
The High Frequency Generator of the above identified equipment has been tested
under field test condition standards recommended by the Joint Industry Committee on
High Frequency Stabilized Arc Welding Machines. It was found to comply with the
Federal Communications Commission established maximum allowable R. F. energy
radiation limit of 10 micro volts per meter at a distance of 1 mile.
If this equipment is installed, operated and maintained as recommended in the accom-
panying manual, it may reasonably be expected to meet the Federal Communications
Commission established R. F. energy radiation limitation.
The Lincoln Electric Company
EQUIPMENT INSTALLATION CERTIFICATION
The above identified equipment has been installed and will be operated and maintained
in compliance with manufacturer’s recommendations made in the accompanying oper-
ating manual.
Certifying Signature & Title
Date
THE LINCOLN ELECTRIC COMPANY CLEVELAND, OHIO U.S.A. S14929 (9-2-83E)
This certificate indicates manufacturer’s conformity to FCC Rules & Regulations. User’s
compliance with these regulations requires he fill out this certificate & attach it to the
equipment or other location where it will be conveniently available for inspection.
F-3 F-3