Lincoln Electric IM946 CRUISER Digital Tractor - Manual (Page 102)

Cruiser™ Tractor
OPERATION
10-25 10-25
Parameter Definition
Exit Setup Menu
P.0 This option is used to exit the setup menu. When P.0 is displayed, press the Left Button to exit the
setup menu.
P.1 Wire Feed Speed Units
This option selects which units to use for displaying wire feed speed. English = inches/minute
wire feed speed units (default). Metric = meters/minute wire feed speed units.
P.2 Arc Display Mode
This option selects what value will be shown on the upper left display while welding.
Amps = The left display shows Amperage while welding (default).
WFS = The left display shows Wire Feed Speed while welding.
P.3 Display Options
This setup parameter was previously named "Display Energy".
If the previous software revision had this parameter set to display energy, that selection will remain.
This option selects the information displayed on the alphanumeric displayes while welding. Not all
P.3 selections will be available on all machines. In order for each selection to be included in the
list, the power source must support that feature. A software update of the power source may be
needed to include the features.
Standard Display = The lower displays will continue to show preset information during and after a
weld (default).
Show Energy = Energy is displayed, along with time in HH:MM:SS format.
Show Weld Score = The accumulative weld score result is shown.
P.12 Travel Carriage Start/Stop - Travel Starts
This option allows the adjustment of the start and end travel options for a travel carriage. Press the
Right Button to enter the option and rotate the Control Knob to select either starting or ending op-
tions. Press the Right Button to enter the selected option. Rotate the Control Knob to select the
desired function. After selecting the function, press the Left Button to save the function and back
out to select another option. Rotate the Control Knob to make another selection, or press the Left
Button to exit this option.
P.12 Travel Carriage Start/Stop - Travel Ends
This option allows the adjustment of the start and end travel options for a travel carriage. Press the
Right Button to enter the option and rotate the Control Knob to select either starting or ending op-
tions. Press the Right Button to enter the selected option. Rotate the Control Knob to select the
desired function. After selecting the function, press the Left Button to save the function and back
out to select another option. Rotate the Control Knob to make another selection, or press the Left
Button to exit this option.
P.12 Tractor Wheel Size
This option allows the adjustment of the wheel diameter used on the Cruiser dX Tractor only. Press
the Right Button to enter the option and rotate the Control Knob to select Wheel Size. Press the
Right Button to enter the selected option. Rotate the Control Knob to select the desired value.
After selecting the value, press the Left Button to save the value and back out to select another
option. Rotate the Control Knob to make another selection, or press the Left Button to exit this op-
tion. When the value is set to 5.65 ipm, the display will read "Track" indicating the track wheels are
being used.
USER DEFINED PARAMETERS