ASA Electronics AVT-1928 - Manual (Page 14)

Erasing a channel from memory
Changing the TV’s channel memory with the menus
You can also use the menu system to add/erase channels from memory:
1. Use the number buttons to tune to the channel, then press MENU.
2. Use the CH buttons to select SETUP and press VOL .
3. Use the CH buttons to select EDIT PROGRAM. If the channel is in memory, it will be
labeled “ADD”, and the number in the corner will be green. If the channel is not in memory, it
will be labeled “ERASE”, and the number in the corner will be magenta.
4. Use the VOL buttons to change the ADD or ERASE setting.
5. Wait 7 seconds, or press MENU twice to exit.
Displaying the Current Channel
12- Chapter 3: Operating Your TV
1. Tune to the channel you want to erase.
2. Press the ADD/ERA button on the remote control.
The channel will turn from green to magenta to
show it has been erased.
1. To quickly see the current channel, press
RECALL. The current channel will be
displayed briefly.