Lincoln Electric IM589 INVERTEC V250-S - Manual (Page 16)

C-1 ACCESSORIES C-1
OPTIONS / ACCESSORIES
CABLE PLUGS
K852-70 - Cable Plug Kit for 1/0-2/0 cable. Attaches
to welding cable to provide quick disconnect from
machine.
K852-95 - Cable Plug Kit for 2/0-3/0 cable.
NOTE: Two K852-70 plugs are included with the
V250-S.
REMOTE CONTROLS
K857 - Remote Output Control for stick welding.
K963 - Hand Amptrol tm for TIG welding. When the
V250-Sʼs Output Control is in the “Remote” position,
the hand Amptrol energizes the output and controls
the output remotely. The Hand Amptrol connects
directly to the 6 pin Amphenol.
K870 - Foot Amptrol tm for TIG welding. When the
V250-Sʼs Output Control is in the “REMOTE” position,
the foot Amptrol energizes the output and controls the
output remotely. The Hand Amptrol connects directly
to the 6 pin Amphenol.
K814 - Arc Start Switch. Energizes the output for TIG
welding if remote output control of the amperage is
not desired. When using the Arc Start Switch set the
Output Control to the “LOCAL” position.
INVERTEC V250-S