Video loss alarm, Motion setup – LT Security LTD831J5 User Manual

Page 39

Advertising
background image

39

4/8/16CH Triplex DVR

Digital Video Recorder

5.2. V

o beep whatever video loss or not.

ideo Loss Alarm

To select or specify the channel for detection.

“Mute”: N

Buzzer-Short”: Beep shortly by buzzer on main board when video loss.

Buzzer-Long”: Beep long by buzzer on main board when video loss.

Alarm-Short”: Beep shortly by speaker of system when video loss.

Alarm-Long”: Beep long by speaker of system when video loss.

5.3. Motion Setup

5.3.1. Motion Mode

To select the motion sensitivity scale as “Sensitive OFF”, “Sensitive Low”,

“Sensitive Normal”, “Sensitive High” or “Sensitive Highest”.

“Sensitive OFF”: No sensitivity

e Low”: Low sensitive level

“Sensitive High”: High sensitive level

“Sensitive Highest”: The highest sensitive level

5.3.2. Record Time

To set the motion’s record time as 5sec, 10sec, 15sec, 20sec, 25sec,

30sec, 45sec, 60sec, 90sec, 120sec, 150sec or 180sec

5.3.3. Alarm Mode

“Mute”: No beep whatever detecting.

“Sensitiv

“Sensitive Normal”: Normal sensitive level

Buzzer-Short”: Beep shortly by buzzer on main board when

detection is active

Buzzer-Long”: Beep long by buzzer on main board when detection

is active

Alarm-Short”: Beep shortly by speaker of system when detection is

active

Alarm-Long”: Beep long by speaker of system when detection is

5.3.4. Alarm Time

To Setup the time period of beep by “Nonstop”(no stop), 5sec, 10sec,

15sec, 20sec, 25sec, 30sec, 35sec, 40sec, 45sec, 50sec, 55sec or 60sec

active

Advertising