LT Security LTD831J5 - Manual (Page 40)

40
4/8/16CH Triplex DVR
Digital Video Recorder
reen when it act as 1sec, 2sec …
5.3.5. Trigger Full Screen
To display the trigger channel on full sc
or 30sec.
“ OFF”: It will not display on full screen when the channel has been
.3.6. Trigger Type
two trigger types: “Initial Trigger” and “Continuous Trigger” for
selection.
hen channel has been triggered, it will display on full
nel has been triggered, it will display on
that time period, this channel is
annel will display on full
etting time period.
5.3.7. Motion Area Setup
n screen for each channel as motion detection area.
t
triggered. Also, the trigger area will turn to “red-color”
5
There are
Initial Trigger: W
screen as the setting time period. In that time period, this channel will
ignore any other trigger.
Continuous Trigger: When chan
full screen as the setting time period. In
still watching out. If another trigger act, the ch
screen and count all over again by the s
Block one area o
It can be done by mouse or by using
(), (),  (), () buttons
to move the area. After positioning, press “ ” and save i
5.4. Senso p r Setu