LT Security IP85PW - Manual (Page 44)

- 44 -
【Se
Se Se Send nd nd nd Email Email Email Email If If If If There There There There Are Are Are Are Alarm Alarm Alarm Alarm】 “On” and “Off” optional
【Priority
Priority Priority Priority】Default is 0.
【User User User User Name Name Name Name】User name of email box.
【Password Password Password Password】Password of email box
【Mail
Mail Mail Mail Server Server Server Server IP IP IP IP】Mail Server IP（SMTP）
【Mail
Mail Mail Mail Server Server Server Server Port Port Port Port】SMTP Server Port.
【Sender's
Sender's Sender's Sender's Name Name Name Name】Sender’s name
【Sender's
Sender's Sender's Sender's Email Email Email Email】Sender’s email address
【Receiver's
Receiver's Receiver's Receiver's Name Name Name Name】Receiver’s name
【Receiver's Receiver's Receiver's Receiver's Email Email Email Email】You can fill in three mail box.
【Test
Test Test Test】After you fill in all the parameters, please click “Test” button to test. If the
notice “Successful”, it means all information are correct and you can use email
alarm function. If the notice is “Connect mailsever failed”, please check the
parameters again.
How to set motion detection email alarm function?
� STEP1 STEP1 STEP1 STEP1 Please set up motion detection, please refer to: 1.3.3.4.1 Motion
Detection Area Settings
� STEP2 STEP2 STEP2 STEP2 Please set correct IP address, especially to fill in correctly DNS
according to your IP device setting and network environment.
� STEP3 STEP3 STEP3 STEP3 Please make sure all information of email alarm setting is correct.
Here is an example of using Foxmail to explain how to set up.