1 general, 1 information about the user manual, 1 legend – LumaSense Technologies M8100SM-EXP User Manual

Page 7: 2 safety

Advertising
background image

E

2

T QUASAR Flare Monitors Operation Manual

General 7

1 General

1.1 Information about the user manual

This manual provides important information that can be used as a work of reference for

installing, operating, maintaining, aligning, and/or troubleshooting your LumaSense
Instrument. It is important that you carefully read the information contained in this manual and

follow all safety procedures before you install or operate the system. To avoid handling errors,
keep this manual in a location where it will be readily accessible.

1.1.1 Legend

Note: Indicates tips and useful information in this manual. All notes should be read
to effectively operate the instrument.

Caution: Denotes information critical to avoiding instrument damage or a severe
impact to processing. When this symbol is found on the instrument it

indicates a potential hazard. Consult the documentation before proceeding

with any actions.

Warning: Denotes information critical to avoiding personal injury, such as when an
electrical hazard is present. When this symbol is found on the instrument it

indicates a potential hazard. Consult the documentation before proceeding

with any actions).

Protective Earth Ground connection.

Caution Must be Followed: reference supplied documents.

Electric Shock Hazard: disconnect service before opening.

Voltage Alternating current (VAC).

Voltage Direct Current (VDC).

1.2 Safety

This manual provides important information on safely installing and operating your LumaSense
Instrument. Several sections of this manual provide safety warnings to avert danger. These

safety warnings are specified with a warning symbol. You must read and understand the

contents of this manual before operating the instrument even if you have used similar
instruments or have already been trained by the manufacturer.
It is also important to continually pay attention to all labels and markings on the instrument and
to keep the labels and markings in a permanent readable condition.
See Chapter 10 Safety Assurances and Precautions for more information.

Advertising
This manual is related to the following products: