Autostart CT-1010 - Manual (Page 5)

Installation Guide P. 5
After selecting the function, press one of the corresponding buttons to select the option.
for Option 1,
for Option 2,
for Option 3;
for Option 4;
+ for Option 5.
+ for Option 6.
Programming Options
MODE 1 * INDICATES DEFAULT SETTING
FUNCTION 1 – Ignition-controlled door locks
OPTION 1* Ignition lock disabled
OPTION 2 Ignition lock enabled
OPTION 3 Ignition unlock ONLY
OPTION 4 Ignition lock ONLY
FUNCTION 2 – Door lock pulse timing
OPTION 1* 7/10-sec. lock/unlock pulses
OPTION 2 4-sec. lock/unlock pulses
OPTION 3 7/10-sec. lock pulse and two ¼ -sec. unlock pulses
OPTION 4 1/10-sec. lock/unlock pulses
FUNCTION 3 – AUX3 Programming – Press the button for 4 seconds (for options 1 through 5)
OPTION 1* Constant while button is pressed
OPTION 2 Toggle ON – Toggle OFF
OPTION 3 60-second pulse
OPTION 4 1-second pulse with Unlock pulse and Disarm pulse
OPTION 5 1-second pulse with Disarm pulse. Once the Trunk is closed, Arm pulse after 5-sec. delay.
OPTION 6 Disarm function (with UNLOCK button)
FUNCTION 4 – AUX2 Programming – Use with button (for options 1 through 4 and car finder)
OPTION 1* Constant while button is pressed – Car finder disabled
OPTION 2 Toggle ON – Toggle OFF with 30 seconds timeout or until ignition ON – Car finder
disabled
OPTION 3 30-second pulse - Car finder disabled
OPTION 4 60-second pulse - Car finder disabled
OPTION 5 Retain accessory output - Car finder enabled
OPTION 6 Arm output - Car finder enabled
FUNCTION 5 – AUX1 Programming
OPTION 1* Priority door
OPTION 2 Dome light output for 60 seconds
OPTION 3 Arm output
OPTION 4 Disarm output
OPTION 5 Retain accessory output