Rhino Shelter Party Tent 14W X 14L X 9H - Manual (Page 12)

Assembly Instructions 14 X 20 X 9 Party Tent Style
V2.0 14 X 20 X 9 Size
Do NOT Return Unit to Store or Dealer. For all Questions or Shortages please call MDM Products LLC directly.
For Customer Service 800-447-7079 or 203-877-7070 8 AM – 5 PM EST
8 4 way frame connectors with a sharp bend for the sides of the tent 4
9 Protective Roof Cover – This unit is protected with UV protection.
Should be carefully protected to avoid any tears or snags. Always
dry completely before storing in storage bag. 1
10 End Wall Panels – Interchangeable between ends of unit, these
provide best access to unit when sidewalls are attached. Always dry
completely before folding for storage. 2
11 Side Wall Panels with Three(3) Windows- Can be optionally
installed on unit for privacy and protection. Sidewalls can be
removed or left off for access, light, and air movement as desired by
occupants. Always dry completely before folding for storage. 2
12 White Plastic Feet Plates for the Interior Straight Uprights and
Corner Poles 8
13 Bungee Cords – Used to Secure the Roof Cover, Sidewalls, End
Panels, and as Door Hold Ups 74
14 M6 x 2-3/8” (60 mm) Hex bolt & M6 lock nut – for Securing Plastic
Feet to base of Corner and Straight Upright Poles 8
15 6 mm washer 16
16 Guy Ropes – for Securing from Roof Corners to Big Stakes 4
17 Small Stakes – for Securing the Base of End Panels, Sidewalls, and
Plastic Feet of Upright Poles to Ground 40
18 Large Stakes- To Secure Guy Ropes from Corner of Unit to Ground 4