Save these instructions, Refer to them often – RIKON Power Tools 61-1600 User Manual

Page 3

Advertising
background image

SAVE THESE INSTRUCTIONS.

Refer to them often.

3

California Proposition 65 Warning

WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains

chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.Your risk from

exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in

a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out

microscopic particles.

For more detailed information about California Propostion 65 log onto rikontools.com.

ALWAYS CHECK FOR DAMAGED PARTS.

Before initial or continual use of the tool, a guard or other part that is damaged should be checked to

assure that it will operate properly and perform its intended function. Check for alignment of moving

parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its

operation. A guard or other damaged parts should immediately be properly repaired or replaced.

ALWAYS DISCONNECT TOOLS.

Disconnect tools before servicing and when changing accessories such as blades, bits, and cutters.

ALWAYS AVOID ACCIDENTAL STARTING.

Make sure switch is in “OFF” position before plugging in cord.

NEVER LEAVE TOOLS RUNNING UNATTENDED.

Special Safety Rules For Dust Collection

1. Do not operate this machine until you have read all of the following instructions.

2. Do not attempt to operate this machine until it is completely assembled.

3. Do not turn ON this machine if any pieces are missing.

4. If you are not familiar with the operation of the machine, obtain assistance from a qualified

person.

5. It is highly recommended that this machine be placed on a level surface.

6. Always wear protective eyewear prior to operating this machine.

7. Do not operate this machine if you are under the influence of drugs and/or alcohol.

8. Remove all jewelry prior to operating this machine.

9. Do not wear any gloves while operating this machine.

10. Always make sure the power switch is in the OFF position prior to plugging in the machine.

11. Always make sure the power switch is in the OFF position when doing any assembly or setup

operation.

12. Always wear a dust mask when cleaning or working near a dust collector.

13. The use of any accessories or attachments not recommended may cause injury to you and

damage your machine.

14. This machine must be properly grounded.

15.Always keep your face and hands clear of moving parts such as impellors and fans.

16.Keep these instructions for future reference.

Advertising