RIKON Power Tools 61-1600 - Manual (Page 9)

9
Maintenance
Changing the Filters
NOTE: Care should be taken when
handling soiled or contaminated filters.
As certain fine dusts can be harmful.
Always wear a suitable mask for
additional protection.
Fig.04
Fig.05
There are two main filters that need to be
changed or cleaned periodically.
The outer filter can be removed by simply
sliding it out of the filter track (A, Fig.04).
There is an arrow indicating the air flow
direction on the outer filter. Make sure the
filter is inserted facing the proper
direction.
The inner filter can be removed by
opening the access panel on the side of
the unit (Fig.05). The inner filter can be
blown out with air, or washed out.
The filters should be replaced depending
on the amount of usage. Clogged filters
will reduce the amount of air circulation.
The third filter is a diffuser which reduces
turbulent noise. This diffuser is reusabe
and needs to be cleaned periodically.
To remove, simply slide it out of the filter
track (Fig.06).
This diffuser can be replace with a
charcoal filter to help eliminate oders.
Contact Tech Support at 1-877-884-5167
for ordering information.
! !
WARNING
To reduce the risk of injury disconnect the
air cleaner from the power source (unplug)
before servicing or changing filters. Failure
to comply may cause serious injury!
Fig.06
A