RIKON Power Tools 70-100 - Manual (Page 5)

5
Unpacking and Clean-up
1. Carefully finish removing all contents from shipping cartons. Compare contents of the shipping
cartons with the list of contents above. Place parts on a protected surface.
2. Report any shipping damage to your local distributor.
3. Clean all rust protected surfaces with kerosene or diesel oil. Do not use; gasoline, paint thinner,
mineral spirits, etc. These may damage painted surfaces.
4. Set packing material and shipping cartons to the side. Do not discard until machine has been
set up and is running properly.
Tools Required for Assembly
Item Description
Phillips Screwdriver
Adjustable Wrench
Contents of Package
Unpack your lathe from its carton and check to see that you have all of the following items. Do not turn
your machine ON if any of these items are missing. You may cause injury to yourself or damage to your
machine.
Unpacking and Checking Contents
Item Description Q’ty
A Lathe.........................................................1
B Knokout Bar..............................................1
C Wrench.....................................................1
D Tool Rest....................................................1
E Live Center................................................1
F Spur Center...............................................1
G Spindle Lock Assembly..............................1
H Knokout Bar for Live Center pointer..........1
I Tool Holder................................................1
J Pan head screw.......................................2
K Manual/Warranty Card................................1