Asus P4GD1 - Manual (Page 117)

A S U S P 4 G D 1 A S U S P 4 G D 1 A S U S P 4 G D 1 A S U S P 4 G D 1 A S U S P 4 G D 1 5 - 1 9 5 - 1 9 5 - 1 9 5 - 1 9 5 - 1 9
RAID Mode................................ Stripe
Un-used Drive(s)......................... 4
Drive(s) in Array........................ 0
Array Capacity (size in MB).............. 8056
IT8212 Setup Utility (C)Copyright 2002-2004 ITE, Inc.
[ Auto Configuration Menu ]
[ Array Configuration ]
Setup Array Type as: RAID 0
[
→
,
←
,Space] Change Option [CTRL-Y] Save [ESC] Exit
3. At the bottom of the screen are the navigation keys. These keys allow
you to move through and select from the menu options.
Auto-configuring a RAID array Auto-configuring a RAID array Auto-configuring a RAID array Auto-configuring a RAID array Auto-configuring a RAID array
This option allows you to select a supported RAID set for the utility to
automatically configure.
To auto-configure a RAID set:
1. From the IT8212 Setup Utility screen, press <1>. The following screen
appears.
2. Use the left or right arrow keys or the space bar to select a RAID set.
As you select an option, the screen displays the array configuration of
the RAID based on the number of IDE devices installed.
3. Press <Ctrl+Y> to save your RAID set.
4. Press <Esc> to exit.
4. Press the number of your selection or <Esc> to exit.
[1]..[5] Select [ESC] Exit