Seca EMR Flash 101 - Manual (Page 16)

16 •
Saving the measured
results
1. Click on send to EMR .
The measured results are transmitted to the patient
record in the PDMS.
2. Check in the PDMS that the measurements have
been correctly transmitted and assigned to the right
patient record.
NOTE:
• Some PDMS can be set up so that the
measurements are transmitted straight to the
PDMS when transmitted via the interface
without this being displayed in the main win-
dow of the seca 101 PC software (Autosend
to PDMS/suppress GUI).
• Contact your administrator if you have any
queries about the PDMS used at your
institution.