Seca EMR Flash 101 - Manual (Page 9)

Installation • 9
English
4. INSTALLATION
4.1 General
The seca 101 PC software should only be installed by
experienced administrators.
Information about configuration options can be found in
the Administrator's manual. If you have any queries or
requests for changes, please contact your administra-
tor or hospital technician.
WARNING!
Misdiagnosis through loss of data
Improper installation or incorrect changes to
installation may cause loss of data and result in
misdiagnosis.
► Make sure the installation or changes to the
installation are carried out by an experienced
administrator or hospital technician.
4.2 Obtaining version information
You can have information displayed about the version
of the PC software installed and about the EMR
module selected. To do so, proceed as outlined below.
1. Start the PC software.
2. Right-click in the header of the software window.
A context menu appears.
3. In the context menu, click on About ... .
The About ... box appears.
4. To close the About ... box, click on ok .