SHARKOON Vaya Value - Manual (Page 14)

VAYA ECONOMY
8. Mounting a 3.5" device
(Take both side panels off the case.)
1. Reach into the case and press the 3.5" front bezel of the 3.5" mounting bay out of the case's front panel
(fig. 15). Remove the quick fasteners from both sides of the mounting bay (fig. 16).
fig. 16
2. Slide the 3.5" device into the mounting bay from the front until the device is flush with the front panel
(fig. 17).
fig. 17
3. Attach the installed device to the case from both sides using the included mounting screws (fig. 18).
fig. 18
(Scews for drive mounting)
4. Connect the 3.5" device as described in its user documentation. (Replace the side panels to the case.)
12
