SHARKOON Vaya Value - Manual (Page 15)

VAYA ECONOMY
9. Mounting an add-on card
(Take the left side panel off the case.)
1. Remove the metal bezel covering the add-on card slot bay by using a gripper.
2. Insert the add-on card into the respective mainboard slot and re-attach it using the fixation screw.
10. Mounting additional fans / optimized airflow
1. Hold the fan against the respective bracket from the inside (e.g. in the side panel).
2. Attach the fan to the fan bracket using the corresponding mounting screws.
Note:
During fan mounting make sure that (cool) air is taken in on the case’s front side/bottom and blown
out on its back side/top. The PC components with the highest heat development should be placed
directly within this airflow.
Legal disclaimer:
As a continuing policy of product improvement at SHARKOON, the design and specifications are subject
to change without prior notice. National product specifications may vary.
All rights reserved especially (also in extracts) for translation, reprinting, reproduction by copying or
other technical means. Infringements will lead to compensation.
All rights reserved especially in case of assignation of patent or utility patent. Means of delivery and
technical modifications reserved.
Disposal of your old product :
Your product is designed and manufactured with high quality materials and components, which can
be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product, it means the product is covered by
the European Directive 2002/96/EC.
Please be informed about the local separate collection system for electrical and electronic products.
Please act according to your local rules and do not dispose of your old products with your normal
household waste. The correct disposal of your old product will help prevent potential negative
consequences to the environment and human health.
© SHARKOON Technologies 2011
www.sharkoon.com
13
