SHARKOON Tauron - Manual (Page 23)

Tauron 23
2. Place the fan against the respective bracket from the inside of the case.
3. Screw the fan to the attachment from the outside.
4. Connect the fan to the mainboard or the PSU.
Notes:
When installing fans, make sure that (cool) air is taken in on the front/bottom of the case and blown out on
its rear side/top. The PC components with the highest heat development should be placed directly within
the airflow.
Legal disclaimer:
As a continuing policy of product improvement at SHARKOON, the design and specifications are subject to
change without prior notice. National product specifications may vary.
All rights reserved especially (also in extracts) for translation, reprinting, reproduction by copying or other
technical means. Infringements will lead to compensation.
All rights reserved especially in case of assignation of patent or utility patent. Means of delivery and technical
modifications reserved.
Disposal of your old product
Your product is designed and manufactured with high quality materials and components, which can be recyc-
led and reused.
When this crossed-out wheeled bin symbol is attached to a product, it means the product is covered by the
European Directive 2002/96/EC.
Please be informed about the local separate collection system for electrical and electronic products.
Please act according to your local rules and do not dispose of your old products with your normal household
waste. The correct disposal of your old product will help prevent potential negative consequences to the envi-
ronment and human health.
© SHarKoon technologies 2012
www.sharkoon.com
