SHARKOON Tauron - Manual (Page 3)

Tauron 3
1. Features
• ATX case
• 2x 5.25" drive bays (external)
• 1x 5.25" or 3.5" drive bays (external)
• 7x 2.5" or 3.5" bays with removable mounting trays for HDDs (internal)
• Top I/O: 2x USB3.0 (internal 19-pin mainboard connector), 2x USB2.0 and 2x audio, power and reset
button, 2x fan speed controllers for up to 6 fans
• 7 slots for add-on cards
• Acrylic side panel
• Plastic front panel with air inlet, drive bay covers in mesh design
• Quick fasteners for optical drives, mainboard mounting with installation opening for CPU coolers
• 4 openings for water cooling
• Cable management system
• Interior painting
• Removable HDD brackets support long VGA cards up to 42 cm
• Fan configuration:
Front panel 2x 120 mm LED fan (pre-installed)
Rear panel 1x 120 mm fan (pre-installed)
Top panel 1x 170 mm fan (pre-installed)
• Dimensions: 510 x 205 x 495 mm (L x W x H)
• Weight: ~9.5 kg
2. Package contents
• ATX case “Tauron”
• Manual flyer
• Accessory kit
Screws for mainboard moun-
ting Mounting screws for 2.5"
HDDs/SSDs Screws for PSU
mounting Screws for HDD mounting
Note:
If you are missing any of the items listed above,
please contact our
customer service immediately:
[email protected] (Germany and Europe)
[email protected] (international).
Stand-offs for mainboard
