Installation of a 3.5" device – SHARKOON T28 User Manual
Page 15
T28
15
fig. 19 fig. 20
(In case there is a metal bezel covering the drive bay, remove it by using a gripper.)
3. Screw the mounting angles to the 3.5" device from both sides (fig. 21).
(Mounting angles)
Note:
If you intend to transport the case we recommend securing (additionally) the installed
drives.
5. Connect the optical drive to the power supply and the mainboard. (Put the front bezel
back onto the case.)
9. Installation of a 3.5" device
(1. Remove the case’s front panel by gently dragging it towards you.)
2. Dismantle the 5.25" front bezel from the mounting bay in which you intend to install
the drive by loosening its screws and pushing the bezel to the inside (fig. 19). Remove
the quick fasteners (fig. 20).