SHARKOON T28 - Manual (Page 16)

T28 16
fig. 21
4. Slide the 3.5" device with attached mounting rails into the case’s drive bay (fig. 22) and
screw it to the drive bay from both sides (fig. 23).
fig. 22 fig. 23
5. Connect the 3.5" device to the power supply and the mainboard.
6. Screw the 5.25" bezel with 3.5" opening into the front panel (fig. 24) and place it back
onto the case.
5.25" bezel with 3.5" opening
fig. 24