Furious – SHARKOON Furious User Manual
Page 10
Advertising
FURIOUS
27
2. Slide the HDD with attached mounting rails into the case’s HDD cage until they lock
(fig. 11).
fig. 11
3. Connect the HDD to the power supply and the mainboard.
Note:
A maximum of four 3.5" HDDs may be installed into the HDD cage. More HDDs may
be installed to the mounting bays for 5.25" drives at the case’s front using e.g. the
SHARKOON Vibe-Fixer mounting frames.
7. Installation of an optical device
1. Open the case’s front bezel.
2. Remove the 5.25" front bezel of the mounting bay where you intend to install the drive
by loosening its screws and pushing the bezel to the inside (fig. 12).
fig. 12
ENGLISH
Advertising