SHARKOON Furious - Manual (Page 11)

FURIOUS
3. Attach the mounting rails to the optical device from both sides (fig. 13).
fig. 13
4. Slide the optical device with attached mounting rails into the case’s drive bay until
they lock (fig. 14).
fig. 14
5. Connect the optical drive to the power supply and the mainboard and close the case’s
front bezel.
(Screws for 5.25" drive mounting)
Note:
If you intend to transport the case we recommend to additionally secure the installed
drive by using screws.
In case the installed device is not flush with the front bezel, you can adjust the
mounting rail’s retaining pins.
ENGLISH
28