Set raid mode, Remove defective raid hdd, 2 connecting to a pc – SHARKOON 2-Bay RAID Box User Manual
Page 5
Advertising
2-BAY RAID BOX
4.2 Connecting to a PC
5. Set RAID mode
1. Toggle the RAID switch to the desired RAID mode.
2. Switch on the device.
3. Press “Mode”. The desired RAID mode will be
activated. During this procedure the status LEDs
will be flashing. As soon as the LEDs for HDDs
light up blue, the procedure is completed and the
device may be accessed.
6. Remove defective RAID HDD
In case a HDD inside a RAID array gets defective,
the according status LED will permanently light-up
in red.
Advertising