Network, Reset device, Password change – SHARKOON USB LANPort 400 Giga User Manual
Page 10: Disconnect request
USB LANPORT 100/400
6.2 Network
A – Left-click the link to select the respective entry.
B – This area displays the current network status: IP Setting
(automatic or manual IP address assignment), IP Address
(IP address assigned to the server), Subnet Mask, MAC
Address (the server’s MAC address).
6.3 Reset Device
A – Left-click the link to select the respective entry.
B – Perform a reset after entering the assigned password
into the “Password” area and confirm by clicking the
“Submit” button, “Clear” will discard your entry.
6.4 Password Change
A – Left-click the link to select the respective entry.
B – To change the current password enter it into the “Current
Password” area, then enter the newly assigned password
into the “New Password” area. Confirm the new pass-
word by re-typing it into the “Confirm New Password”
area. Left-clicking “Submit” will complete this procedure,
“Clear”
will
abort.
7. Disconnect request
A device being connected to the USB server and mounted by a
single user is contemporaneously locked for all other users.
The icon “Remote Occupied” indicates that the connected
device currently is not available; the button “Connect Device” is
disabled.
Now via the device’s context menu a disconnect request can be
sent to the current user:
8
A
B
A
B
A
B
C