SHARKOON USB LANPort 400 Giga - Manual (Page 12)

USB LANPORT 100/400
9. Examples of use
9.1 Network use
(single user, IP address manually assigned)
User A wants to integrate the USB LANPort into his local network and connects the docking station to his router using
the included patch cable. He plugs a SATA HDD and a USB stick to the USB LANPort; his IP addresses were configured
manually; a DHCP server is not activated.
Router: 192.168.10.1
Computer: 192.168.10.2
User A installed the included software on his computer and starts it by double-clicking (left mouse button) on the
desktop icon:
The server software’s user interface will display the USB server:
The software has detected the USB server and assigned it a standard IP address, but this address is from another address
range (error message: “in different network segment”). The device may not be accessed yet; first the server must be
assigned an IP address from the local network’s address range. Right-clicking the USB server’s entry inside the user
interface brings up the server’s context menu:
10
